Economic Fast Fully Automatic Armature Winding Machine For Hook
1. This machine can automatically wind armature.
2. This machine select to wind single or twice.
3. This machine is suitable for hook type armature.
4. Machine will auto alarm if any abnormal condition occurs.
Three winding mode: single slot-single hook, single slot-double
hook and double layer winding. It could do twice winding in one
slot, four times winding in the two adjacent slots.
It could select to wind single or twice, set to wind on the journal
of the armature, slow rise and slow decline function, stable type
fixture, up-down protective module, protective hooking.
Only can snap break the wire: winding before break the wire, or
break before winding.
Production parameter for 100nos armatures could be stored
Display parameter, including shift output, total output, consuming
time, present slot No. turn No. and hook No., etc.
Automatic alarm if any abnormal condition occurs: alarm on the
touch screen, buzz alarm and light tower alarm.
Manually put the armature onto the winding station.
Main technical data:
Wire diameter range: ￠0.19~￠0.65mm
Armature diameter: ￠20~￠60 mm
Armature stack length: 10~60 mm
Armature slot number: odd or even slot
Shaft length: 50~ 250mm
Turn number: 0~99999
Commutator diameter: ￠12~￠42 mm
Winding speed: 0~2000 rpm
Indexing speed: 0~2000 rpm
Action: single action or automatic
Production efficiency: 600pcs/8hours(based on armature with 12slots
Air supply pressure: 4~6 Kg/cm2
The machine total power: 3.0 KW
Voltage: three phase AC380V±10%, 50/60 Hz
Weight: about 400 Kg
Working station of this winding machine
Video Link of this machine