Armature Automatic Type Aluminum Die Casting Machine Cast Aluminum
This armature aluminum die casting machine is suitable for aluminum
armature to do casting. It adopts a vertical structure.Machine can
make four armatures at same time.
(1) Parmater of this armature aluminum die casting machine
|mold clamping force||400Kn|
|Oil cylinder travel||400mm|
|injection cylinder travel||160mm|
|Working station area||480x620mm|
|injection chamber OD||60—120 mm|
|Motor power||7.5—4 KW|
|Oil pump model number||YBE—32|
(2) Technical requirement
1.the machine is controlled by PLC.
2.Injection cyliner has three different injecting mode, slow
injecting, fast injecting and secondary injecting. The injecting
flow of fast injecting can be manually adjusted.
3.Machine is equipped with auto feeding device, cutting device and
mold unloading device.
4.This machine has protector doors on all sides. It is pneumatic
protector door in the fore-and-aft direction.
5 Machine is equipped with water cooling system.
6.Each machine is equipped with two pieces of stuff canister, which
(3) Machine feature
1. rapid mould closing
2. with feeding, cutting and mold unloading device
3. It can once make four products if the rotor outside diamter is
Rotor suitable for this machine